Technical Support

FAQ

Updates

NetTerminal^TM Frequently Asked Questions > 1

How do I setup my NetTerminal for a basic network (a network without routers)?
Note: The following steps assume that you have a UNIX server with TCP/IP installed:

1. Obtain an IP address from your System Administrator for the NetTerminal and your server.
2. Press <ALT+ t> and then <e> to activate the Ethernet Interface dialog.
3. If the Ethernet port was previously disabled, you will be asked if you want to enable it [Press <y> to enable].
4. Enter the NetTerminal IP address.
5. Press <tab> to select the Subnet Mask field. Type in the subnet mask.
6. Select Save or press <Enter> to activate the Ethernet address and close the Ethernet Interface address configuration dialog box.